What’s New?

CURRENT VERSION: 2024 v3

New Features:

Heavy-Duty

Engine Support
Brake Support

Off-Highway

Medium-Duty

General

Integration Features

Download Update

JPRO Heavy-Duty Features

Engine Support

HEAVY-DUTY SUPPORT FOR

International

Bi-Directional support for International engines:
- Actuator Test supported on:
  - Aftertreatment (AFT) Purge Air Actuator
    - A26 GHG17 engines
  - Diesel Exhaust Fluid (DEF) Line Heaters supported on:
    - A26 GHG17 engines
  - Diesel Exhaust Fluid (DEF) Tank Valve Heater supported on:
    - A26 GHG17 engines
  - Engine Fuel Actuator Control 1 (Pump) supported on:
    - A26 GHG17 engines
  - Engine Fuel Actuator Control 2 (Rail) supported on:
    - A26 GHG17 engines
  - Fuel Ignitor supported on:
    - A26 GHG17 engines
  - Fuel Solenoid supported on:
    - A26 GHG17 engines
  - Variable Geometry Turbocharger (VGT) supported on:
    - A26 GHG17 engines
- Forced Active Regen supported on:
  - A26 GHG17 engines

HEAVY-DUTY SUPPORT FOR

PACCAR

Bi-Directional support for PACCAR engines:
- Cylinder Compression Test supported on:
  - GHG17 to GHG21 all MX engines

Brake Manufacturer Support

HEAVY-DUTY SUPPORT FOR

Bendix Trailer Brakes

Supports reading and clearing proprietary fault codes and SAE sensor data for the following:
- TABS‑6™ Advanced Single‑Channel (SC) Trailer ABS
- TABS‑6™ Multi‑Channel (MC) Trailer ABS
- TABS-8™ Trailer ABS
Supports reading and clearing faults for iSense – Pro (ADB Continuous Pad Wear Sensing) ECUs.
Supports trailer diagnostics over CAN for TABS‑6™ Advanced Single‑Channel Trailer ABS, TABS‑6™ Advanced Multi‑Channel Trailer ABS and Bendix® TABS-8™ Trailer ABS modules using the Bendix 4-pin to 9-pin diagnostics extension cable.
The EOL (End of Line) Test provides a suite of tests used to validate if the trailer ABS and its sensors are installed and functioning properly, and are available for:
- TABS‑6™ Advanced Single‑Channel Trailer ABS
- TABS-6™ Multi-Channel (MC) Trailer ABS
- TABS-8™ Trailer ABS
- EOL Test report provides general ECU information, test results, and information gathered by individual tests.
- Individual EOL tests are also available from the bi-directional test menu.
ECU Configuration provides technicians the tools to set the configuration and parameters of TABS-6™ Multi-Channel (MC) Trailer ABS ECUs.
Bi-Directional Support for Bendix Trailers:
- ABS Indicator Lamp Test supported on:
  - TABS‑6™ Advanced Single‑Channel Trailer ABS | TABS-6™ Multi-Channel (MC) Trailer ABS | TABS-8™ Trailer ABS
- Axle Load Test supported on:
  - TABS‑6™ Advanced Single‑Channel Trailer ABS | TABS-6™ Multi-Channel (MC) Trailer ABS | TABS-8™ Trailer ABS
- Battery Voltage Test supported on:
  - TABS‑6™ Advanced Single‑Channel Trailer ABS | TABS-6™ Multi-Channel (MC) Trailer ABS | TABS-8™ Trailer ABS
- Chuff Test supported on:
  - TABS-6™ Multi-Channel (MC) Trailer ABS | TABS-8™ Trailer ABS
- Door Switch Status Test supported on:
  - TABS‑6™ Advanced Single‑Channel Trailer ABS | TABS-6™ Multi-Channel (MC) Trailer ABS | TABS-8™ Trailer ABS
- ECU Configuration supported on:
  - ABS Configuration, Load and Sensor Configuration, TRSP, Auxiliary IO
  - TABS-6™ Multi-Channel (MC) Trailer ABS
- ECU Information Test* supported on:
  - TABS‑6™ Advanced Single‑Channel Trailer ABS | TABS-6™ Multi-Channel (MC) Trailer ABS | TABS-8™ Trailer ABS
- General Output Functions Test supported on:
  - TABS‑6™ Advanced Single‑Channel Trailer ABS | TABS-6™ Multi-Channel (MC) Trailer ABS | TABS-8™ Trailer ABS
  - NOTE: Functions available vary based on brake ECU configuration.
- Installation Angle Test supported on:
  - TABS‑6™ Advanced Single‑Channel Trailer ABS | TABS-6™ Multi-Channel (MC) Trailer ABS | TABS-8™ Trailer ABS
- Installation Configuration Test supported on:
  - TABS‑6™ Advanced Single‑Channel Trailer ABS | TABS-6™ Multi-Channel (MC) Trailer ABS | TABS-8™ Trailer ABS
- Lift Axle Control Test supported on:
  - TABS‑6™ Advanced Single‑Channel Trailer ABS | TABS-6™ Multi-Channel (MC) Trailer ABS | TABS-8™ Trailer ABS
  - NOTE: Supports LAC1 and LAC2.
- Lift Axle Sensing Test supported on:
  - TABS‑6™ Advanced Single‑Channel Trailer ABS | TABS-6™ Multi-Channel (MC) Trailer ABS | TABS-8™ Trailer ABS
  - NOTE: Supports LAS1 and LAS2.
- Lift Lower Test supported on:
  - TABS‑6™ Advanced Single‑Channel Trailer ABS | TABS-6™ Multi-Channel (MC) Trailer ABS | TABS-8™ Trailer ABS
- Low Pressure Warning Emergency Test supported on:
  - TABS‑6™ Advanced Single‑Channel Trailer ABS | TABS-6™ Multi-Channel (MC) Trailer ABS | TABS-8™ Trailer ABS
- Low Pressure Warning Service Test supported on:
  - TABS‑6™ Advanced Single‑Channel Trailer ABS | TABS-8™ Trailer ABS
- P-21 Delivery Test supported on:
  - TABS-6™ Multi-Channel (MC) Trailer ABS | TABS-8™ Trailer ABS
- P-21 Modulator Test supported on:
  - TABS‑6™ Advanced Single‑Channel Trailer ABS | TABS-6™ Multi-Channel (MC) Trailer ABS | TABS-8™ Trailer ABS
- P-22 Delivery Test supported on:
  - TABS-6™ Multi-Channel (MC) Trailer ABS
- P-22 Modulator Test supported on:
  - TABS-6™ Multi-Channel (MC) Trailer ABS
- Pad Wear Test supported on:
  - TABS‑6™ Advanced Single‑Channel Trailer ABS | TABS-6™ Multi-Channel (MC) Trailer ABS | TABS-8™ Trailer ABS
- Pressure Sensor Test supported on:
  - TABS‑6™ Advanced Single‑Channel Trailer ABS | TABS-6™ Multi-Channel (MC) Trailer ABS | TABS-8™ Trailer ABS
- S-C and S-D Sensor Tests supported on:
  - TABS‑6™ Advanced Single‑Channel Trailer ABS | TABS-6™ Multi-Channel (MC) Trailer ABS | TABS-8™ Trailer ABS
- S-E and S-F Sensor Tests supported on:
  - TABS-6™ Multi-Channel (MC) Trailer ABS
  - NOTE: Supports 4 sensor configuration only.
- Scratchpad Test* supported on:
  - TABS‑6™ Advanced Single‑Channel Trailer ABS | TABS-6™ Multi-Channel (MC) Trailer ABS | TABS-8™ Trailer ABS
- Tire Inflation System Test supported on:
  - TABS‑6™ Advanced Single‑Channel Trailer ABS | TABS-6™ Multi-Channel (MC) Trailer ABS | TABS-8™ Trailer ABS
- Wear SensingTest supported on:
  - TABS-6™ Multi-Channel (MC) Trailer ABS with minimum software version of TCWG.730.88
  - NOTE: Requires QWS on SENS IN 1 and 2.
  - *Test only displayed within the EOL Test dialog.
- Wheel Speed Chart Test supported on:
  - All braking systems reporting wheel speed values
- Wheel Speed Window Test supported on:
  - All braking systems reporting wheel speed values

HEAVY-DUTY SUPPORT FOR

Bendix Driver Assistance Systems (DAS)

Updated support for AG12 software version for Steering Assist ECUs.
Bi-Directional support for Bendix Driver Assistance Systems:
- Pressure Trimming and Coil Polarity Test supported on:
  - Steering Assist AG12 software

JPRO Off-Highway Support

ENGINE SUPPORT FOR

Caterpillar

Supports reading SAE faults and sensor data on 2010 and newer models:

Equipment Description

Backhoe Loader

Compact Track Loader

Excavator

Genset

Hydraulic Shovel

Industrial Engine

Material Handler

Padfoot Compactor

Petroleum Power Train (Transmission)

Pneumatic Compactor

Power Module

Skid Steer (Both)

Smooth Drum Compactor

Telehandler

Equipment Models

415F2 (C3.4B), 415F2 IL (C3.4B), 427F2 (C3.4B)

239D3 (C2.2), 249D3 (C2.2)

311F LRR (C3.4B), 312F GC (C3.4B), 313F GC (C3.4B), 320 (C4.4), M323F (C4.4)

XQ35 (C2.2)

6030 (C27)

C13 (C13), C13B (C13B), C15 (C15), C18 (C18 ), C18 (C18), C27 (C27), C3.4B (C3.4B), C4.4 (C4.4), C7 (C7), C9 (C9), C9.3 (C9.3)

MH3037 (C7)

CP34 (C3.4B), CP44B (C3.4B), CP5 (C3.4B), CP56B (C4.4), CP68B (C4.4), CP74B (C4.4)

CX31-C13I (C13), CX31-C18I (C18), CX31-P600-C13I (C13), CX31-P600-C9I (C9), CX35-P800-C18I (C18), CX35-P800-C27I (C27), TH35-C13I (C13), TH48-E70-C27I (C27)

CW14 (C3.4B), CW16 (C3.4B)

XQ35 (C2.2)

216B2 (C2.2), 216B3 (C2.2), 226B2 (C2.2), 226B3 (C2.2), 226D3 (C2.2), 232B2 (C2.2), 232D (C2.2), 232D3 (C2.2), 236D3 (C2.2), 239D (C2.2), 242B2 (C2.2), 247B2 (C2.2), 247B3 (C2.2), 249D (C2.2), 257B2 (C2.2)

CB44B (C3.4B), CB46B (C3.4B), CB54B (C3.4B), CB7 (C3.4B), CB8 (C3.4B), CD10 (C3.4B), CD44B (C3.4B), CD4B (C3.4B), CD54B (C3.4B), CD8 (C3.4B), CS34 (C3.4B), CS56B (C4.4), CS66B (C4.4), CS68B (C4.4), CS74B (C4.4), CS76B (C4.4), CS78B (C4.4)

CS44B (C3.4B)

CS5 (C3.4B)

TH336C (C3.4B), TH337C (C3.4B), TH3510D (C3.4B), TH357D (C3.4B), TH406C (C3.4B), TH407C (C3.4B), TH408D (C3.4B), TH414C (C3.4B), TH417C (C3.4B), TH514C (C3.4B), TH514D (C3.4B), TL642C (C3.4B), TL642D (C3.4B), TL943C (C3.4B), TL943D (C3.4B)

Diagnostic Connector Location

TBD

In Cab - On floorboard on Driver's right

In Cab - Driver's right side below the start switch.

TBD

Supports reading proprietary diagnostic fault codes, event codes, and data for the following Caterpillar off-highway 2010 and newer models:

Equipment Description

Asphalt Paver

Backhoe Loader

Cold Planer

Compact Wheel Loader

Crawler Dozer

Excavator

Feller Buncher

General Forestry

Knuckleboom Loader

Landfill Compactor

Load Haul Dump

Log Loader

Material Handler

Motor Grader

Off-Highway Truck

Padfoot Compactor

Petroleum Power Train (Transmission)

Pipelayer

Pneumatic Compactor

Road Reclaimer

Site Prep Tractor

Smooth Drum Compactor

Soil Stabilizer/Recycler

Telehandler

Track Loader

Track Processor/Harvester

Wheel Dozer

Wheel Feller Buncher

Wheel Loader

Wheel Scraper

Wheel Skidder

Equipment Models

AP1000 (C7.1), AP1000 F (C7.1), AP1000E (C7.1), AP1055 (C7.1), AP1055 F (C7.1), AP1055E (C7.1), AP1055E/BG1055E (C7.1), AP400 (C3.6), AP455 (C3.6), AP500E (C4.4), AP500F (C4.4B), AP555E (C4.4), AP555F (C4.4B), AP600F (C4.4B), AP655F (C4.4B), BG1000E (C7.1), BG1055E (C7.1), BG500E (C4.4), BG555E (C4.4)

415 (C3.6), 416F (C4.4), 416F (C4.4B), 416F2 (C4.4B), 420E (C4.4), 420F (C4.4), 420F (C4.4B), 420F2 (C4.4B), 420F2 IT (C4.4B), 424 (C3.6), 428 (C3.6), 428F (C4.4), 428F2 (C4.4B), 430 (C3.6), 430E (C4.4), 430F (C4.4), 430F (C4.4B), 430F2 (C4.4B), 430F2 IT (C4.4B), 432 (C3.6), 432F (C4.4), 432F (C4.4B), 432F2 (C4.4B), 434 (C3.6), 434F (C4.4), 434F (C4.4B), 434F2 (C4.4B), 440 (C4.4B), 444 (C3.6), 444F (C4.4), 444F (C4.4B), 444F2 (C4.4B), 450 (C4.4B), 450E (C4.4), 450F (C4.4), 450F (C4.4B)

416 (C3.6), 420 (C3.6), 420 XE (C3.6)

PM310 (C9.3), PM312 (C9.3), PM313 (C9.3)

910 (C3.6), 910M (C4.4B), 914 (C3.6), 914G2 (C4.4), 914M (C4.4B), 918M (C4.4B), 920 (C3.6)

D1 (C3.6), D1 LGP (C3.6), D2 (C3.6), D2 LGP (C3.6), D3 (C3.6), D3 LGP (C3.6), D3K LGP (C4.4), D3K LGP (C4.4B), D3K XL (C4.4), D3K2 LGP (C4.4), D3K2 LGP (C4.4B), D3K2 XL (C4.4), D3K2 XL (C4.4B), D4K LGP (C4.4), D4K XL (C4.4), D4K2 LGP (C4.4), D4K2 LGP (C4.4B), D4K2 XL (C4.4), D4K2 XL (C4.4B), D5K LGP (C4.4), D5K XL (C4.4), D5K2 LGP (C4.4), D5K2 LGP (C4.4B), D5K2 XL (C4.4), D5K2 XL (C4.4B), D6K2 (C6.6), D6K2 (C7.1), D6K2 LGP (C4.4B), D6K2 LGP (C6.6), D6K2 XL (C4.4B), D6K2 XL (C6.6), D6N LGP (C6.6), D6N LGP (C7.1), D6N XL (C6.6), D6N XL (C7.1), D6T (C9.3), D6T LGP (C9.3), D6T XL (C9.3), D6T XL VPAT (C9.3), D6T XW (C9.3), D7 (C9.3), D7E (C9.3), D7E LGP (C9.3), D8T (C15)

D4 (C4.4B), D5 (C7.1), D6 (C9.3), D6 XE (C9.3)

D8 (C15)

312E (C4.4), 312E (C4.4B), 312E L (C4.4), 312E L (C4.4B), 312F (C4.4B), 313 (C3.6), 313 GC (C3.6), 313F (C4.4B), 313F L (C4.4B), 314E CR (C4.4), 314E CR (C4.4B), 314E CR/E LCR (C4.4B), 314E LCR (C4.4), 314E LCR (C4.4B), 314F (C4.4B), 315F L (C4.4B), 316E L (C4.4), 316E L (C4.4B), 316F L (C4.4B), 317 (C3.6), 317 GC (C3.6), 318E L (C4.4), 318E L (C4.4B), 318F L (C4.4B), 320 (C4.4B), 320E (C6.6), 320E L (C6.6), 320E LN (C6.6), 320E LRR (C6.6), 320E RR (C6.6), 320E/E L (C6.6), 320E/E L/E LN (C6.6), 320F L (C4.4B), 323 (C7.1), 323E (C6.6), 323E L (C6.6), 323E LN (C6.6), 323E SA (C6.6), 323E/E L/E LN (C6.6), 323F L (C7.1), 323F LN (C4.4B), 323F SA (C4.4B), 324E (C7.1), 324E L (C7.1), 324E/E L (C7.1), 325F L (C4.4B), 326 (C7.1), 326F L (C7.1), 326F LN (C7.1), 329E (C7.1), 329E L (C7.1), 329E LN (C7.1), 329E/E L (C7.1), 329F L (C7.1), 330 (C7.1), 330 GC (C7.1), 330F (C7.1), 330F L (C7.1), 333 (C7.1), 335 (C7.1), 335F L (C7.1), 335F LCR (C7.1), 336 GC (C7.1), 336E (C9.3), 336E H (C9.3), 336E L (C9.3), 336E LH (C9.3), 336E LN (C9.3), 336E LNH (C9.3), 336F (C9.3), 336F L (C9.3), 336F L XE (C9.3), 336F LN (C9.3), 336F LN XE (C9.3), 336F LXE (C9.3), 336F XE (C9.3), 340 (C9.3), 340F (C9.3), 345 GC (C9.3), 349E (C13), 349E L (C13), 349E L HVG (C13), 349E L VG (C13), 349E/E L (C13), 349F (C13), 349F L (C13), 349F/F L (C13), 350 (C9.3), 352F (C13), 352F-VG (C13), 374F L (C15), M313D (C4.4), M314 (C3.6), M314F (C4.4B), M315 D2 (C4.4), M315D (C4.4), M315F (C4.4B), M316F (C4.4B), M317 D2 (C4.4), M317F (C4.4B), M318F (C7.1), M320F (C7.1), M322 (C7.1), M322F (C7.1), M323F (C4.4B)

315 (C3.6), 315 GC (C3.6)

320 GC (C4.4B), 336 (C7.1), 336 (C9.3)

2570C (C7.1), 2570D (C7.1), 2670C (C7.1), 2670D (C7.1), 521 (C9.3), 522 (C9.3), 563C (C7.1), 573C (C7.1)

548 (C7.1), 558 (C7.1), 568 (C9.3), FM538 (C7.1), FM568 (C9.3)

2384C (C6.6), 2384D (C4.4B), 2484C (C6.6), 2484D (C4.4B), 559C (C6.6), 559D (C4.4B), 579C (C6.6), 579D (C4.4B)

826K (C15)

R2900 (C15)

538 (C7.1), 548 (C7.1), 558 (C7.1), 568 (C9.3), 568 LL (C9.3), 938K (C6.6), FM538 (C7.1), FM568 (C9.3)

938M (C7.1)

MH3022 (C7.1), MH3024 (C7.1), MH3026 (C7.1), MH3032 (C7.1), MH3040 (C7.1), MH3050 (C9.3), MH3250 (C9.3)

120 (C7.1), 120M (C7.1), 120M II (C7.1), 12M (C9.3), 140 (C9.3), 140 GC (C7.1), 140M (C9.3), 14M (C13), 14M III (C13), 150 (C9.3), 16 (C13), 160 (C9.3), 160M (C9.3), 16M (C13), 16M III (C13), 18 (C13), 18M (C13), 18M III (C13)

14 (C13), 140 (C9.3)

725 (C9.3), 725C (C9.3), 725C2 (C9.3), 730 (C13), 730C (C13), 730C2 (C13), 735 (C13), 735B (C15), 735C (C15), 740 (C15), 740B (C15), 770 (C15), 770G (C15)

815 (C7.1), 815K (C7.1), 816 (C7.1), 816K (C7.1), 824 (C15), 824K (C15), 825 (C15), 825K (C15), 826 (C15), CP11 (C4.4B), CP11 GC (C3.6), CP12 (C4.4B), CP12 GC (C3.6), CP13 GC (C3.6), CP14 (C4.4B), CP16 (C4.4B), CP44 (C4.4), CP54 XT (C4.4), CP54B (C4.4), CP54B (C4.4B), CP56B (C4.4), CP56B (C4.4B), CP68B (C4.4), CP68B (C4.4B), CP7 (C3.6), CP74B (C4.4), CP74B (C4.4B)

CX31-P600-C9.3I (C9.3), C31-P600-C15I (C15), CX31-P600-C18I (C18), CX35-P800_C18I (C18), CX38-P892-C18I (C18), TH35-C13I (C13), TH35-C15I (C15), TH35-C15T (C15), TH48-E70-C27I (C27)

PL61 (C4.4B), PL72 (C9.3), PL83 (C15), PL87 (C15)

CW34 (C4.4), CW34 (C4.4B)

RM500 (C15), RM400 (C9.3), RM500B (C15)

2864C (C9.3), 586C (C9.3)

CB10 (C3.6), CB10 (C4.4B), CB13 (C4.4B), CB15 (C4.4B), CB16 (C4.4B), CB34 (C4.4), CB44B (C4.4), CB44B (C4.4B), CB54 (C4.4), CB54B (C4.4), CB54B (C4.4B), CB64 (C4.4), CB64B (C4.4B), CB66B (C4.4B), CB68B (C4.4B), CB7 (C3.6), CB8 (C3.6), CCS7 (C4.4B), CS10 GC (C3.6), CS11 (C4.4B), CS11 GC (C3.6), CS12 (C4.4B), CS12 GC (C3.6), CS13 GC (C3.6), CS14 (C4.4B), CS16 (C4.4B), CS19 (C4.4B), CS54 (C4.4), CS54 XT (C4.4), CS54B (C4.4), CS54B (C4.4B), CS56B (C4.4), CS56B (C4.4B), CS64B (C4.4), CS64B (C4.4B), CS66B (C4.4), CS66B (C4.4B), CS68B (C4.4), CS68B (C4.4B), CS7 (C3.6), CS74B (C4.4), CS74B (C4.4B), CS76B (C4.4), CS76B (C4.4B), CS78B (C4.4), CS78B (C4.4B)

CS44 (C4.4)

RM400 (C9.3B), RM500B (C15)

TH3510 (C3.6), TH3510D (C4.4), TH357 (C3.6), TH357D (C4.4), TH408 (C3.6), TH408D (C4.4), TL1055 (C3.6), TL1055D (C4.4), TL1255 (C3.6), TL1255D (C4.4), TL642 (C3.6), TL943 (C3.6)

953 (C7.1), 953K (C7.1), 963 (C7.1), 963K (C7.1), 973K (C9.3)

568 (C9.3)

814 (C7.1), 814K (C7.1)

563D (C7.1), 573D (C7.1)

924K (C6.6), 926 (C7.1), 930 (C7.1), 930K (C6.6), 938 (C7.1), 950 (C7.1), 950K (C7.1), 950M Z (C7.1), 962 (C7.1), 962K (C7.1), 962M (C7.1), 962M Z (C7.1), 966 (C7.1), 966 (C9.3), 966 GC (C9.3), 966 XE (C9.3), 966K (C9.3), 966K XE (C9.3), 966M (C9.3), 966M XE (C9.3), 972 (C7.1), 972 (C9.3), 972 XE (C9.3), 972K (C9.3), 972M (C9.3), 972M XE (C9.3), 980K (C13), 980M (C13), 982 (C13), 982M (C13), 986 (C15), 986K (C15), 988 GC (C15), R1700 (C13)

926M (C7.1), 930M (C7.1), 938M (C7.1), 950 GC (C7.1), 950M (C7.1)

950GC (C7.1)

621 (C13), 621H (C13), 621K (C13), 623 (C13), 623H (C13), 623K (C13), 627 (C13), 627 (C9.3), 627H (C13), 627H (C9.3), 627K (C13), 627K (C9.3), 637 (C9.3), 637K (C9.3), 657K (C15)

525D (C7.1), 535D (C7.1), 545D (C7.1), 555D (C7.1)

Diagnostic Connector Location

TBD

In Cab - Right Side Access Panel

TBD

In Cab - Right Side of Seat

In Cab - Behind Seat - Right Side

TBD

In Cab - Behind Seat - Left

In Cab - Behind Seat - Right

TBD

In Cab - Behind Seat

TBD

In Cab - Under steering wheel below the Start switch

TBD

In Cab - Behind Seat

HEAVY-DUTY SUPPORT FOR

Cummins

Ammann

Supports reading proprietary diagnostic fault codes, event codes, and data for the following Ammann Off-Highway 2013 and newer models:

Equipment Type

Soil Compactor

Supported On

ASC 110 D (QSB4.5)

Ammann Bi-Directional support for Cummins engines:

Bi-Directional Test / Calibration

Cylinder Cut-Out Test

DPF Service Regen

SCR Performance and System Test

Wiggle Test/Performance Issue Monitoring

Supported On

QSB4.5

NOTE: The models listed above are verified to work in JPRO. Users may be able to connect to additional models and attain partial or complete coverage functionality.

ASV

Supports reading proprietary diagnostic fault codes, event codes, and data for the following ASV Off-Highway 2013 and newer models:

Equipment Type

Compact Track Loader

Supported On

RT 75(QSF2.8), RT 120(QSF3.8)

ASV Bi-Directional support for Cummins engines:

Bi-Directional Test / Calibration

Cylinder Cut-Out Test

DPF Service Regen

SCR Performance and System Test

Wiggle Test/Performance Issue Monitoring

Supported On

QSF3.8

NOTE: The models listed above are verified to work in JPRO. Users may be able to connect to additional models and attain partial or complete coverage functionality.

Bergman

Supports reading proprietary diagnostic fault codes, event codes, and data for the following Bergman Off-Highway 2020 and newer models:

Equipment Type

Wheeled Dump Truck

Supported On

C815S (QSB4.5), C828S (QSB6.7)

Bergman Bi-Directional support for Cummins engines:

Bi-Directional Test / Calibration

Cylinder Cut-Out Test

DPF Service Regen

Fuel Leakage Test

SCR Performance and System Test

Wiggle Test/Performance Issue Monitoring

Supported On

QSB4.5, QSB6.7

QSB4.5

QSB6.7

QSB4.5, QSB6.7

NOTE: The models listed above are verified to work in JPRO. Users may be able to connect to additional models and attain partial or complete coverage functionality.

Bomag

Supports reading proprietary diagnostic fault codes, event codes, and data for the following Bomag Off-Highway 2010 and newer models:

Equipment Type

Mobile Feeder

Drum Roller

Supported On

BMF 2500 Series (QSB5.9)

BW 200 Series (QSB5.9)

NOTE: The models listed above are verified to work in JPRO. Users may be able to connect to additional models and attain partial or complete coverage functionality.

Ditch Witch

Supports reading proprietary diagnostic fault codes, event codes, and data for the following Ditch Witch Off-Highway 2010 and newer models:

Equipment Type

Trencher

Directional Drill

Supported On

HT 275 (QSC8.3), HT 275 (QSL9)

JT100 ALL TERRAIN (QSB6.7), JT100 (QSB6.7), JT24 (F3.8), JT25 (QSB4.5), JT30 ALL TERRAIN (QSB4.5), JT30 (QSB4.5), JT40 (QSB4.5), JT60 ALL TERRAIN (QSB6.7), JT60 (QSB6.7), AT 40 ALL TERRAIN (QSB4.5)

Ditch Witch Bi-Directional support for Cummins engines:

Bi-Directional Test / Calibration

Cylinder Cut-Out Test

DPF Service Regen

Fuel Leakage Test

SCR Performance and System Test

Wiggle Test/Performance Issue Monitoring

Supported On

QSB4.5, QSB6.7, QSL9

F3.8, QSB4.5, QSL9

QSB6.7, QSL9

QSB4.5, QSB6.7, QSL9

F3.8, QSB4.5, QSB6.7, QSL9

NOTE: The models listed above are verified to work in JPRO. Users may be able to connect to additional models and attain partial or complete coverage functionality.

Dynapac

Supports reading proprietary diagnostic fault codes, event codes, and data for the following Dynapac Off-Highway 2010 and newer models:

Equipment Type

Tandem Roller

Compactor

Wheeled Finisher

Vibratory Roller

Supported On

CC 2200 C(QSB3.3), CC2300(QSB3.3), CC3200(QSB3.3)

CP 1200(QSF2.8), CP 274(QSB4.5), CT3000(QSB6.7), F1000T(QSB6.7)

FC1400C II(QSF2.8), F 2500 CS(QSB6.7), F 2500 W(QSB6.7), F 3030C(QSB6.7), F 2500 C, (QSB6.7), F 2500 CS,(QSB6.7), MF2500CL(QSB6.7), MF2500CM(QSB6.7), MF2500CS (QSB6.7), F1000W(QSB6.7), F800T(QSB6.7), F800W(QSB6.7)

150 A (QSB3.3), 150 AD(QSB3.3), CA 150 P(QSB3.3), CA 150(QSB3.3), CA 1300 PD(QSB4.5), CA 250 D-II(QSB4.5), CA 250 PD(QSB4.5), CA 2500 D(QSB4.5), CA 2500 PD(QSB4.5), CA 250-II(QSB4.5), CA 252 D(QSB4.5), CA 252(QSB4.5), CA 302 D(QSB4.5), CA 302 PD(QSB4.5), CA 3500 D(QSB4.5), CA 3500 D(QSF3.8), CA 3500 PD(QSB4.5), CA 3500 PD(QSF3.8), CA 362 D(QSB6.7), CA 362 PD(QSB6.7), CA 4000 D(B4.5), CA 4000 D(QSB4.5), CA 4000 PD(B4.5), CA 4000 PD(QSB4.5), CA 702 D(QSB6.7), CA 702 PD(QSB6.7), CA2500(QSB4.5), CA5500D(B4.5), CA5500PD(B4.5), CA6000D(B4.5), CC 4000 C VI(QSF3.8), CC 4000 VI(QSF3.8), CC 4200 C VI(QSF3.8), CC 4200 C(QSB4.5), CC 4200 VI(QSF3.8), CC 4200(QSF3.8), CC 5200 C VI(QSF3.8), CC 5200 C(QSB4.5), CC 5200(QSB4.5), CC 6200 C VI(QSF3.8), CC 6200 VI(QSF3.8), CC 6200(QSB4.5), CC 7200(QSB6.7),

Dynapac Bi-Directional support for Cummins engines:

Bi-Directional Test / Calibration

Cylinder Cut-Out Test

DPF Service Regen

Fuel Leakage Test

SCR Performance and System Test

Wiggle Test/Performance Issue Monitoring

Supported On

QSB4.5, QSB6.7, QSF3.8

B4.5, QSB4.5, QSF3.8

QSB6.7

QSB4.5, QSB6.7, QSF3.8

NOTE: The models listed above are verified to work in JPRO. Users may be able to connect to additional models and attain partial or complete coverage functionality.

Gradall

Supports reading proprietary diagnostic fault codes, event codes, and data for the following Gradall Off-Highway 2010 and newer models:

Equipment Type

Wheel Excavator

Hydraulic Excavator

Supported On

D 152(ISB6.7), D 154(ISB6.7)

D 172(ISB6.7), D 174(ISB6.7)

NOTE: The models listed above are verified to work in JPRO. Users may be able to connect to additional models and attain partial or complete coverage functionality.

Hitachi

Supports reading proprietary diagnostic fault codes, event codes, and data for the following Hitachi Off-Highway 2010 and newer models:

Equipment Type

Wheeled Loader

Supported On

ZW310-5A(QSM11), ZW330(QSM11)ZW370(QSX15), ZW140ZW150(QSB4.5), ZW140-6 (QSB4.5), ZW180(QSB6.7), ZW180-5(QSB6.7), ZW200-5(QSB6.7), ZW200-5A(QSB6.7), ZW200-6(QSB6.7), ZW310-6(QSL9)

Dynapac Bi-Directional support for Cummins engines:

Bi-Directional Test / Calibration

Cylinder Cut-Out Test

DPF Service Regen

Fuel Leakage Test

SCR Performance and System Test

Wiggle Test/Performance Issue Monitoring

Supported On

QSB4.5, QSB6.7, QSL9

QSB4.5, QSL9

QSB6.7, QSL9

QSB4.5, QSB6.7, QSL9

NOTE: The models listed above are verified to work in JPRO. Users may be able to connect to additional models and attain partial or complete coverage functionality.

Hydrema

Supports reading proprietary diagnostic fault codes, event codes, and data for the following Hydrema Off-Highway 2013 and newer models:

Equipment Type

Loader Backhoe

Off Highway Truck

Wheel Excavator

Supported On

906 E(QSB4.5), 908 E(QSB4.5)

912 F(QSB4.5), 922 C(QSB5.9), 922 C(QSB6.7), H 926 E-ESD(QSB4.5), H 928 E-ESD(QSB4.5)

MX 14(QSB4.5), MX 16(QSB4.5), MX 18(QSB4.5)

Hydrema Bi-Directional support for Cummins engines:

Bi-Directional Test / Calibration

Cylinder Cut-Out Test

DPF Service Regen

Fuel Leakage Test

SCR Performance and System Test

Wiggle Test/Performance Issue Monitoring

Supported On

QSB4.5, QSB6.7

QSB4.5

QSB6.7

QSB4.5, QSB6.7

NOTE: The models listed above are verified to work in JPRO. Users may be able to connect to additional models and attain partial or complete coverage functionality.

Hyundai CE

Supports reading proprietary diagnostic fault codes, event codes, and data for the following Hyundai CE Off-Highway 2010 and newer models:

Equipment Type

Excavator

Wheel Loader

Compactor

Wheel Excavator

Compact Loader

Supported On

R850LC-9(QSX15), 480LC-9 MH, (QSM11), 480LC-9A(QSX11.9), 520LC-9A(QSX11.9), HX480A L(X12), HX520A L(X12), R480LC-9(QSM11), R800LC-7A, (QSX15), R800LC-9, (QSX15), R800LC-9A, (QSX15), R800LC-9A,(QSX15), R850LC-9(QSX15), 210W-9A(QSB6.7), 220LC-9A(QSB6.7), 235LCR-9A(QSB6.7), 260LC-9A(QSB6.7), 300LC-9A(QSB6.7), 330LC-9A(QSL9), 380LC-9A(QSL9), HX140A L(QSF3.8), HX140LC(QSF3.8), HX220AL(QSB6.7), HX220L(QSB6.7), HX220LR(QSB6.7), HX300L(QSB6.7)

HL 935, (QSB6.7), HL 940, (QSB6.7), HL 955(QSB6.7), HL760-9(QSB6.7), HL770-9(QSL9), HL980A XT(X12), HL980A(X12)

HR110C(QSF3.8), HR120C(QSF3.8), HR140C(QSF3.8)

HW140A(QSB4.5), HW160A,(QSB4.5), HW170A CR(QSB4.5), HW210(QSB6.7), HW210(QSB6.7), HW210A(QSB6.7), HW250A MH(QSB6.7)

R110C, (QSF3.8), R140C(QSF3.8), R140W-9A(QSB6.7)

Hyundai CE Bi-Directional support for Cummins engines:

Bi-Directional Test / Calibration

Cylinder Cut-Out Test

DPF Service Regen

Fuel Leakage Test

SCR Performance and System Test

Wheel Speed Chart Test or Wheel Speed Window Test

Wiggle Test/Performance Issue Monitoring

Supported On

QSB4.5, QSB6.7, QSF3.8, QSL9, QSX15

QSB4.5, QSF3.8, QSL9, QSX15

QSB6.7, QSL9, QSX15

QSB4.5, QSB6.7, QSF3.8, QSL9

QSX15

QSB4.5, QSB6.7, QSF3.8, QSL9, QSX15

NOTE: The models listed above are verified to work in JPRO. Users may be able to connect to additional models and attain partial or complete coverage functionality.

JCB

Supports reading proprietary diagnostic fault codes, event codes, and data for the following JCB Off-Highway 2010 and newer models:

Equipment Type

Wheel Loader

Articulated Dump Truck

Backhoe Loader

Supported On

467ZX(QSM11), 427(QSB6.7), 435S(QSB6.7), 437(QSB6.7), 437HT(QSB6.7), 457HT(QSB6.7), 457S(QSB6.7), 457ZX(QSB6.7)

700(QSB6.7)

HMEE(QSB6.7)

JCB Bi-Directional support for Cummins engines:

Bi-Directional Test / Calibration

Cylinder Cut-Out Test

DPF Service Regen

SCR Performance and System Test

Wiggle Test/Performance Issue Monitoring

Supported On

QSB6.7

NOTE: The models listed above are verified to work in JPRO. Users may be able to connect to additional models and attain partial or complete coverage functionality.

Kalmar

Supports reading proprietary diagnostic fault codes, event codes, and data for the following Kalmar Off-Highway 2010 and newer models:

Equipment Type

Off-Highway Truck

Supported On

T2(B6.7), TT618i(B6.7)

Kalmar Bi-Directional support for Cummins engines:

Bi-Directional Test / Calibration

Cylinder Cut-Out Test

DPF Service Regen

Fuel Leakage Test

SCR Performance and System Test

Wiggle Test/Performance Issue Monitoring

Supported On

B6.7

NOTE: The models listed above are verified to work in JPRO. Users may be able to connect to additional models and attain partial or complete coverage functionality.

Kawasaki KCM

Supports reading proprietary diagnostic fault codes, event codes, and data for the following Kawasaki KCM Off-Highway 2010 and newer models:

Equipment Type

Wheel Loader

Wheeled Loader

Supported On

90ZV-2(QSM11)

60ZV-2 SERIES(QSB4.5), 70TM7 SERIES(QSB6.7), 70TMV-2(QSB6.7), 70Z7 SERIES(QSB6.7), 70ZV SERIES(QSB6.7), 70ZV-2 SERIES(QSB6.7), 80Z7(QSB6.7), 80ZV-2(QSB6.7), 85ZV(QSL9), 90Z7(QSL9), 90ZV(QSL9)

Kawasaki KCM Bi-Directional support for Cummins engines:

Bi-Directional Test / Calibration

Cylinder Cut-Out Test

DPF Service Regen

Fuel Leakage Test

SCR Performance and System Test

Wiggle Test/Performance Issue Monitoring

Supported On

QSB4.5, QSB6.7, QSL9

QSB4.5, QSL9

QSB6.7, QSL9

QSB4.5, QSB6.7, QSL9

NOTE: The models listed above are verified to work in JPRO. Users may be able to connect to additional models and attain partial or complete coverage functionality.

Leeboy

Supports reading proprietary diagnostic fault codes, event codes, and data for the following Leeboy Off-Highway 2010 and newer models:

Equipment Type

Road Widener

Force Feed Loader

Motor Grader

Asphalt Pavers

Chip Spreader

Supported On

RW-85(QSF2.8), 4130B(QSF3.8)

3000C(QSF3.8)

685D(QSF3.8), 695B(QSF3.8), G700B(QSF3.8)

8816(QSF3.8)

CSM(QSB4.5), CSV(QSB4.5)

Leeboy Bi-Directional support for Cummins engines:

Bi-Directional Test / Calibration

Cylinder Cut-Out Test

DPF Service Regen

SCR Performance and System Test

Wiggle Test/Performance Issue Monitoring

Supported On

QSB4.5, QSF3.8

NOTE: The models listed above are verified to work in JPRO. Users may be able to connect to additional models and attain partial or complete coverage functionality.

Liebherr

Supports reading proprietary diagnostic fault codes, event codes, and data for the following Liebherr Off-Highway 2010 and newer models:

Equipment Type

Material Handler

Rough Terrain Crane

Crane

Excavator

Supported On

LH 24(QSB4.5), LH 26(QSB4.5)

LRT 1090-2.1(QSB6.7)

LRT 1100-2.1(QSB6.7)

R 922(QSB6.7), R 924(QSB6.7)

Liebherr Bi-Directional support for Cummins engines:

Bi-Directional Test / Calibration

Cylinder Cut-Out Test

DPF Service Regen

Fuel Leakage Test

SCR Performance and System Test

Wiggle Test/Performance Issue Monitoring

Supported On

QSB4.5, QSB6.7

QSB4.5

QSB6.7

QSB4.5, QSB6.7

NOTE: The models listed above are verified to work in JPRO. Users may be able to connect to additional models and attain partial or complete coverage functionality.

Link-Belt

Supports reading proprietary diagnostic fault codes, event codes, and data for the following Link-Belt Off-Highway 2010 and newer models:

Equipment Type

Rough Terrain Crane

All Terrain Crane

Crane

Telescopic Crane

Supported On

100 RT(QSB6.7), 120 RT(QSB6.7), 75 RT(QSL9), RTC 80160 SII(QSL9), RTC 8050 SII(QSB4.5), RTC 8065 SII(QSB6.7), RTC 8090(QSL9)

175 AT(QSX15), ATC 3200(QSB6.7)

138 HSL(QSB6.7), 228 HSL(QSB6.7), 238 HSL(QSB6.7), HTC 8660 SL(QSM11), HTC 8675 Series II(QSX15), HTC 8690 LB(ISX12), HTC 8690 LB(QSX15), HTC 8690(ISX12), HTC 8690(QSX15), 138 HSL(QSB6.7 CM2350), 218 V(QSB6.7), 228 HSL(QSB6.7 CM2350), 238 HSL(QSB6.7 CM2350), 248 HSL(QSB6.7), 298 HSL(QSL9), 348 HSL(QSL9), TCC 1200(QSL9), TCC 1400(QSL9), TCC 2500(QSL9), TCC 500(QSL9), TCC 750(QSB6.7), TCC 800(QSB6.7)

HTT 86100(QSX15), HTT 86100(X12), HTT 86110(QSX15), HTT 86110(X12), HTT 8675(QSX15), HTT 8675(X12)

Liebherr Bi-Directional support for Cummins engines:

Bi-Directional Test / Calibration

Cylinder Cut-Out Test

DPF Service Regen

Fuel Leakage Test

SCR Performance and System Test

Wheel Speed Chart Test or Wheel Speed Window Test

Wiggle Test/Performance Issue Monitoring

Supported On

QSB4.5, QSB6.7, QSL9, QSX15

QSB4.5, QSL9, QSX15

QSB6.7, QSL9, QSX15

QSB4.5, QSB6.7, QSL9

QSX15

QSB4.5, QSB6.7, QSL9, QSX15

NOTE: The models listed above are verified to work in JPRO. Users may be able to connect to additional models and attain partial or complete coverage functionality.

Liugong

Supports reading proprietary diagnostic fault codes, event codes, and data for the following Liugong Off-Highway 2010 and newer models:

Equipment Type

Cold Planer

Wheel Loader

Excavator

Mining Truck

Directional Drill

Diaphragm Wall Grab

Trencher

Dozer

Paver

Vibratory Roller

Wheel Loader

Excavator

Supported On

5100-2(QSB5.9)

886H(QSM11), 890H(QSM11), 890H(X12)

945E(QSM11), 950E(QSG12), 950E(X12), 950F(X12), 970E(QSX15)

DR50C(QSX15), DW90A(QSM11)

RD45A-CS(QSC8.3), SD36A(QSM11), SH32(QSM11), SH36C(QSM11), SH39(QSM11), SH46A(QSX15)

SG50A(QSM11), SG70(QSM11)

SX40A(QSM11), SX50(QSX15)

230C(B6.7)

509A(QSB6.7)

6212E(QSB4.5), 6213E(QSB4.5), 6214E(QSB4.5), 6520E(QSB4.5), 6612E(QSB4.5)

CLG856H(QSB6.7), 848H(QSB6.7), 856H(B6.7), 856H(QSL9), 862H(QSL9), 870H(QSL9), 877H(L9)

913E(QSF3.8), 915E(QSB4.5), W915E(QSB4.5), 936E(QSL), 939E(L9)

Liugong Bi-Directional support for Cummins engines:

Bi-Directional Test / Calibration

Cylinder Cut-Out Test

DPF Service Regen

Fuel Leakage Test

SCR Performance and System Test

Wheel Speed Chart Test or Wheel Speed Window Test

Wiggle Test/Performance Issue Monitoring

Supported On

QSB4.5, QSB6.7, QSL9, QSX15

QSB4.5, QSL9, QSX15

QSB6.7, QSL9, QSX15

QSB4.5, QSB6.7, QSL9

QSX15

QSB4.5, QSB6.7, QSL9, QSX15

NOTE: The models listed above are verified to work in JPRO. Users may be able to connect to additional models and attain partial or complete coverage functionality.

Manitowoc

Supports reading proprietary diagnostic fault codes, event codes, and data for the following Manitowoc Off-Highway 2010 and newer models:

Equipment Type

Crane

Wheel Loader

Crane

Supported On

1015(QSX15), 15000(QSM11), 16000(QSX15), 18000(QSX15), 2250(QSX15), 31000(QSX15), 777(QSC8.3), 888(QSM11), 999(QSM11), MLC300(QSG12), MLC650(QSX15), 14000(QSL9),

555(QSL9)

MLC100(QSB6.7), MLC100A(QSB6.7), MLC150(QSB6.7), MLC165(QSB6.7), MLC80A(QSB6.7), MLC90A(QSB6.7)

Manitowac Bi-Directional support for Cummins engines:

Bi-Directional Test / Calibration

Cylinder Cut-Out Test

DPF Service Regen

Fuel Leakage Test

SCR Performance and System Test

Wheel Speed Chart Test or Wheel Speed Window Test

Wiggle Test/Performance Issue Monitoring

Supported On

QSB6.7, QSL9, QSX15

QSL9, QSX15

QSB6.7, QSL9, QSX15

QSB6.7, QSL9

QSX15

QSB6.7, QSL9, QSX15

NOTE: The models listed above are verified to work in JPRO. Users may be able to connect to additional models and attain partial or complete coverage functionality.

New Holland CE

Supports reading proprietary diagnostic fault codes, event codes, and data for the following New Holland CE Off-Highway 2010 and newer models:

Equipment Type

Dozer

Supported On

D350(QSM11)

NOTE: The models listed above are verified to work in JPRO. Users may be able to connect to additional models and attain partial or complete coverage functionality.

Pettibone

Bi-Directional support for Cummins engines, reading proprietary diagnostic fault codes, event codes, and data for the following Pettibone Off-Highway 2010 and newer models:

Equipment Type

Telehandler

Supported On

1056x (QSF3.8), 1246x (QSF3.8), 1256x (QSF3.8), 1544x (QSF3.8), T944x (QSF3.8), T1056X (QSF3.8), T1246X (QSF3.8), T1256X (QSF3.8), 445F2 (QSF3.8)

Pettibone Bi-Directional support for Cummins engines:

Bi-Directional Test / Calibration

Cylinder Cut-Out Test

DPF Service Regen

SCR Performance and System Test

Wiggle Test/Performance Issue Monitoring

Supported On

1056x (QSF3.8), 1246x (QSF3.8), 1256x (QSF3.8), 1544x (QSF3.8), T944x (QSF3.8), T1056X (QSF3.8), T1246X (QSF3.8), T1256X (QSF3.8), 445F2 (QSF3.8)

NOTE: The models listed above are verified to work in JPRO. Users may be able to connect to additional models and attain partial or complete coverage functionality.

Sakai

Supports reading proprietary diagnostic fault codes, event codes, and data for the following Sakai Off-Highway 2010 and newer models:

Equipment Type

Vibratory Roller

Tandem Roller

Supported On

SV414D(QSF2.8), SV414T(QSF2.8), SV544D(QSF3.8), SV544T(QSB4.5)

SW994(QSF3.8)

SAKAI Bi-Directional support for Cummins engines:

Bi-Directional Test / Calibration

Cylinder Cut-Out Test

DPF Service Regen

SCR Performance and System Test

Wiggle Test/Performance Issue Monitoring

Supported On

QSB4.5, QSF3.8

NOTE: The models listed above are verified to work in JPRO. Users may be able to connect to additional models and attain partial or complete coverage functionality.

Sany

Supports reading proprietary diagnostic fault codes, event codes, and data for the following Sany Off-Highway 2010 and newer models:

Equipment Type

Crane

Cold Planer

Grader

Combination Roller

Asphalt Pavers

Crane

Grader

Vibratory Roller

Excavator

Supported On

SCC3500A(QSM11)

SCM600-3(QSX15)

SMG200C-6(QSC8.3), SAG200C-6(QSB6.7)

SPR260C-6(QSB5.9), SPR300C-6(QSB5.9)

SAP60C-7(QSB4.5)

SCC1350A(QSL9), SCC2600A(QSL9)

SMG180C-6(QSB6.7), SMG200C-6(QSB6.7)

SSR100C-6(QSB4.5), SSR120C-6(QSB4.5)

SY215C(QSB6.7), SY215CLC(QSB6.7), SY225C(QSB6.7), SY235CLC(QSB6.7), SY265C(QSB6.7), SY305C LC(QSL9), SY335C LC(QSL9), SY365C(QSL9), SY390H(QSL9, SY500H(QSG12)

Sany Bi-Directional support for Cummins engines:

Bi-Directional Test / Calibration

Cylinder Cut-Out Test

DPF Service Regen

Fuel Leakage Test

SCR Performance and System Test

Wiggle Test/Performance Issue Monitoring

Supported On

QSB4.5, QSB6.7, QSL9

QSB4.5, QSL9

QSB6.7, QSL9

QSB4.5, QSB6.7, QSL9

NOTE: The models listed above are verified to work in JPRO. Users may be able to connect to additional models and attain partial or complete coverage functionality.

Sennebogen

Supports reading proprietary diagnostic fault codes, event codes, and data for the following Sennebogen OffHighway 2010 and newer models:

Equipment Type

Crane

Cycle Crane

Material Handler

Supported On

6100E (QSX15), 690 HD(QSM11), 690 HD(QSX15), 1100(QSB6.7), 1100E(QSB6.7)

640(B6.7), 624(B6.7),730(QSB6.7), 738 M(QSB6.7),818 M(QSB4.5), 821R E(B4.5), 824 G(B4.5), 825 M(QSB6.7)

8100(QSB4.5), 8130 EQ(QSB4.5), 8160 EQ(QSB6.7)

Sennebogen Bi-Directional support for Cummins engines:

Bi-Directional Test / Calibration

Cylinder Cut-Out Test

DPF Service Regen

Fuel Leakage Test

SCR Performance and System Test

Wiggle Test/Performance Issue Monitoring

Supported On

B6.7, QSB4.5, QSB6.7

B4.5, B6.7, QSB4.5

B6.7, QSB6.7

B6.7, QSB4.5, QSB6.7

NOTE: The models listed above are verified to work in JPRO. Users may be able to connect to additional models and attain partial or complete coverage functionality.

Tadano Faun

Supports reading proprietary diagnostic fault codes, event codes, and data for the following Tadano Faun Off-Highway 2010 and newer models:

Equipment Type

Crane

Supported On

GTC-350(QSB4.5), GTC-600(QSB6.7), GTC-800(QSB6.7)

Tadano Faun Bi-Directional support for Cummins engines:

Bi-Directional Test / Calibration

Cylinder Cut-Out Test

DPF Service Regen

Fuel Leakage Test

SCR Performance and System Test

Wiggle Test/Performance Issue Monitoring

Supported On

QSB4.5, QSB6.7

QSB4.5

QSB6.7

QSB4.5, QSB6.7

NOTE: The models listed above are verified to work in JPRO. Users may be able to connect to additional models and attain partial or complete coverage functionality.

Terex

Supports reading proprietary diagnostic fault codes, event codes, and data for the following Terex Off-Highway 2010 and newer models:

Equipment Type

All Terrain Crane

Skid Steer

Articulated Dump Truck

Wheel Loader

Rock Truck

Crane

Rough Terrain Crane

Hydraulic Excavator

Wheel Loader

Excavator

Supported On

MAC 50(QSC)

R265T(QSF2.8)

TA 251(QSM11), TA 27-7(QSM11), TA 300(QSM11), TA 30-7(QSM11), TA25-7(QSC8.3), TA25-7(QSM11), TA 27-7(QSL9)

TL 420(QSM11), TL 450(QSM11)

TR 35(QSM11)

T340-1(QSC8.3), 1065(QSB6.7), 1075(QSB6.7), 1100(QSB6.7), RT 130(QSL9), RT 230(QSB4.5), RT 555(QSB6.7), RT 670(QSB6.7), T 340-1 XL(L9)

RT 780(QSB6.7)

TC 210 LC(QSB6.7), TC 210(QSB6.7), TC 240 LC(QSB6.7), TC 240(QSB6.7), TC 260 LC(QSB6.7), TC 260(QSB6.7)

TL 210(QSB6.7), TL 260(QSB6.7), TL 310(QSB6.7)

TW 190(QSB6.7), TW 240(QSB6.7)

Terex Bi-Directional support for Cummins engines:

Bi-Directional Test / Calibration

Cylinder Cut-Out Test

DPF Service Regen

Fuel Leakage Test

SCR Performance and System Test

Wiggle Test/Performance Issue Monitoring

Supported On

QSB4.5, QSB6.7, QSL9

L9, QSB4.5, QSL9

QSB6.7, QSL9

L9, QSB4.5, QSB6.7, QSL9

QSB4.5, QSB6.7, QSL9

NOTE: The models listed above are verified to work in JPRO. Users may be able to connect to additional models and attain partial or complete coverage functionality.

Tiger Cat

Supports reading proprietary diagnostic fault codes, event codes, and data for the following Tiger Cat Off-Highway 2010 and newer models:

Equipment Type

Loader

Material Handler

Mulcher

Supported On

234(QSB6.7), 845(QSB6.7)

600D(QSB6.7)

M700 SERIES(QSB6.7)

Tiger Cat Bi-Directional support for Cummins engines:

Bi-Directional Test / Calibration

Cylinder Cut-Out Test

Fuel Leakage Test

SCR Performance and System Test

Wiggle Test/Performance Issue Monitoring

Supported On

QSB6.7

NOTE: The models listed above are verified to work in JPRO. Users may be able to connect to additional models and attain partial or complete coverage functionality.

Vermeer

Supports reading proprietary diagnostic fault codes, event codes, and data for the following Vermeer Off-Highway 2010 and newer models:

Equipment Type

Chipper

Tractor

Supported On

BC1200XL(QSB3.3), BC2100XL(QSB6.7)

FT100(QSF3.8), FT300(QSL9)

Vermeer Bi-Directional support for Cummins engines:

Bi-Directional Test / Calibration

Cylinder Cut-Out Test

DPF Service Regen

Fuel Leakage Test

SCR Performance and System Test

Supported On

QSB6.7, QSF3.8, QSL9

QSF3.8, QSL9

QSB6.7, QSL9

QSB6.7, QSF3.8, QSL9

NOTE: The models listed above are verified to work in JPRO. Users may be able to connect to additional models and attain partial or complete coverage functionality.

Wirtgen

Supports reading proprietary diagnostic fault codes, event codes, and data for the following Wirtgen Off-Highway 2010 and newer models:

Equipment Type

Cold Planer

Supported On

W 100 XFI(QSL9), W 120 XFI(QSL9), W 120 XTI(QSL9), W 130 XFI(QSL9), W 150 CFI(QSL9), W 250I(QSL9), W 200 FI(QSX15), W 200 HI(QSX15), W 207 FI(QSX15), W 250I(QSX15)

Wirtgen Bi-Directional support for Cummins engines:

Bi-Directional Test / Calibration

Cylinder Cut-Out Test

DPF Service Regen

Fuel Leakage Test

SCR Performance and System Test

Wheel Speed Chart Test or Wheel Speed Window Test

Wiggle Test/Performance Issue Monitoring

Supported On

QSL9, QSX15

QSL9

QSX15

QSL9, QSX15

NOTE: The models listed above are verified to work in JPRO. Users may be able to connect to additional models and attain partial or complete coverage functionality.

Wollard

Supports reading proprietary diagnostic fault codes, event codes, and data for the following Wollard Off-Highway 2013 and newer models:

Equipment Type

Passenger Stair

Tug

Conventional Pushback Tractor

Loader

Tug

Conventional Pushback Tractor

Supported On

CMPS 170(B3.3), CMPS 228(B3.3), TML 704(B3.3)

M 100(QSB3.3)

M 60(QSF2.8)

TC 1000(B3.3)

M 100(QSB4.5)

M 140(QSB4.5), M 200(QSB4.5), M 400(QSB6.7), MB 2(QSB6.7), MB 4(QSB4.5), MB 4(QSB6.7)

Wollard Bi-Directional support for Cummins engines:

Bi-Directional Test / Calibration

Cylinder Cut-Out Test

DPF Service Regen

Fuel Leakage Test

SCR Performance and System Test

Wiggle Test/Performance Issue Monitoring

Supported On

QSB4.5, QSB6.7

QSB4.5

QSB6.7

QSB4.5, QSB6.7

NOTE: The models listed above are verified to work in JPRO. Users may be able to connect to additional models and attain partial or complete coverage functionality.

XCMG

Supports reading proprietary diagnostic fault codes, event codes, and data for the following XCMG Off-Highway 2013 and newer models:

Equipment Type

Wheel Loader

Grader

Rough Terrain Crane

Backhoe Loader

Vibratory Roller

Excavator

Crane

Directional Drill

Supported On

LW1100KN(QSX15), LW1200KN(QSX15), LW600K(QSC8.3), LW700KV(QSM11), LW800K(QSM11), LW800KN(QSM11), LW820G(QSM11), LW900KN(QSM11)

GR135C(QSB4.5), GR180C(QSB6.7), GR300(QSL9)

RT100(QSL9), RT120E(QSL9), RT200E(QSL9), RT25(QSB6.7), RT35(QSB6.7), RT40E(QSB6.7), RT50(QSB6.7), RT50A(QSB6.7), RT55E(QSB6.7), RT55U(QSB6.7), RT60(QSB6.7), RT60A(QSB6.7), RT70E(QSB6.7), RT70U(QSB6.7), RT80(QSL9), RT90E(QSL9), RT90U(QSL9)

XC870HK(QSB4.5), XC870K(QSB4.5)

XD121(QSF3.8), XS142(B5.9), XS162(B5.9), XS182(B5.9), XS202(B5.9), XS222(B5.9)

XE210C(QSB6.7), XE250C(QSB6.7), XE300U(QSB6.7)

QUY80(QSC8.3), XG500(QSM11), XGC100(QSC8.3), XGC300(QSM11), XGC400(QSM11), XGC650(QSX15), QUY150(QSL9), QUY250(QSL9), QUY260(QSL9), QUY280(QSL9), QUY70(QSB6.7), XG360(QSL9), XGC130(QSL9), XGC260(QSL9), XGC55(QSB6.7), XE470C(QSM11), XE470CK(QSM11), XE470U(QSM11), XE490CH(X12), XE490CK(X12), XE490U(X12), XE500C(QSM11), XE500CA(QSM11), XE500D(QSM11), XE700C(QSX15), XE700D(QSX15), XE900C(QSX15), XE900D(QSX15)

XMZ130(QSB6.7), XMZ160(QSB6.7), XR180D(QSB6.7), XR180D-II(QSB6.7), XR220(QSL9), XR220A(QSL9), XR220D(QSL9), XR220D-II(QSL9), XR260D(QSL9), XM200(QSX15), XR120D(B5.9), XR200(QSM11), XR250(QSM11), XR280(QSM11), XR280D(QSM11), XR280D-II(QSM11), XR320D(QSM11), XR360(QSM11), XR400D(QSX15), XR400E(QSX15), XR460D(QSX15), XRS1050(QSM11), XZ260(QSB5.9), XDY2000(X12)

XCMG Bi-Directional support for Cummins engines:

Bi-Directional Test / Calibration

Cylinder Cut-Out Test

DPF Service Regen

Fuel Leakage Test

SCR Performance and System Test

Wheel Speed Chart Test or Wheel Speed Window Test

Wiggle Test/Performance Issue Monitoring

Supported On

QSB4.5, QSB6.7, QSF3.8, QSL9, QSX15

QSB4.5, QSF3.8, QSL9, QSX15

QSB6.7, QSL9, QSX15

QSB4.5, QSB6.7, QSF3.8, QSL9

QSX15

QSB4.5, QSB6.7, QSF3.8, QSL9, QSX15

NOTE: The models listed above are verified to work in JPRO. Users may be able to connect to additional models and attain partial or complete coverage functionality.

ZoomLion

Supports reading proprietary diagnostic fault codes, event codes, and data for the following ZoomLion Off-Highway 2013 and newer models:

Equipment Type

Diaphragm Wall Grab

Excavator

Directional Drill

Rough Terrain Crane

Trencher

Crane

Supported On

ZDG650(QSM11)

ZE135E(QSF3.8), ZE135E-10F(QSF3.8), ZE155E-10(QSF3.8), ZE480E(QSM11), ZE700E(QSX15), ZR220A(QSL9)

ZR280C(QSM11), ZR360C(QSM11), ZR360L(QSM11)

RT25(QSB6.7), RT35(QSB6.7), RT60(QSB6.7), RT61(QSB6.7), RT65(QSB6.7), RT75(QSB6.7), RT100(QSC8.3), RT110(QSC8.3)

RT80(QSB6.7)

QUY180(QSL9), ZCC1300(QSL9), ZCC2600(QSL9)

ZoomLion Bi-Directional support for Cummins engines:

Bi-Directional Test / Calibration

Cylinder Cut-Out Test

DPF Service Regen

Fuel Leakage Test

SCR Performance and System Test

Wiggle Test/Performance Issue Monitoring

Supported On

QSB6.7, QSF3.8, QSL9

QSF3.8, QSL9

QSB6.7, QSL9

QSB6.7, QSF3.8, QSL9

NOTE: The models listed above are verified to work in JPRO. Users may be able to connect to additional models and attain partial or complete coverage functionality.

JPRO® Medium-Duty Support

HEAVY-DUTY SUPPORT FOR

GM

Supports GM 6.6L (L8T) engines on:
- 2020 – 2021 GMC and Chevy Full Sized Trucks 1500, 2500 and 3500
- 2021 – 2023 GMC Express and Chevy Savana
- 2021 – 2024 Chevy Low Cab Forward 3500, 4500, 5500, 6500
- 2022 – 2024 Chevy Silverado HD and GMC Sierra HD
- 2020 – 2024 Freightliner MT45 trucks
Bi-Directional support for GM engines:
- Engine Controls Ignition Relay supported on:
  - 2020 – 2021 GMC and Chevy Full Sized Trucks 1500, 2500 and 3500 with 6.6L Gas engine | 2021 – 2023 GMC Express and Chevy Savana with 6.6L Gas engine | 2021 – 2024 Chevy Low Cab Forward 3500, 4500, 5500, 6500 with 6.6L Gas engine | 2022 – 2024 Chevy Silverado HD and GMC Sierra HD | 2020 – 2024 Freightliner MT45 trucks with 6.6L Gas engine
- Misfire Graphic supported on:
  - 2020 – 2021 GMC and Chevy Full Sized Trucks 1500, 2500 and 3500 with 6.6L Gas engine | 2021 – 2023 GMC Express and Chevy Savana with 6.6L Gas engine | 2021 – 2024 Chevy Low Cab Forward 3500, 4500, 5500, 6500 with 6.6L Gas engine | 2022 – 2024 Chevy Silverado HD and GMC Sierra HD | 2020 – 2024 Freightliner MT45 trucks with 6.6L Gas engine
- Cylinder Cut Out supported on:
  - 2020 – 2021 GMC and Chevy Full Sized Trucks 1500, 2500 and 3500 with 6.6L Gas engine | 2021 – 2023 GMC Express and Chevy Savana with 6.6L Gas engine | 2021 – 2024 Chevy Low Cab Forward 3500, 4500, 5500, 6500 with 6.6L Gas engine | 2022 – 2024 Chevy Silverado HD and GMC Sierra HD | 2020 – 2024 Freightliner MT45 trucks with 6.6L Gas engine
- Reset Oil Life supported on:
  - 2020 – 2021 GMC and Chevy Full Sized Trucks 1500, 2500 and 3500 with 6.6L Gas engine | 2021 – 2023 GMC Express and Chevy Savana with 6.6L Gas engine | 2021 – 2024 Chevy Low Cab Forward 3500, 4500, 5500, 6500 with 6.6L Gas engine | 2022 – 2024 Chevy Silverado HD and GMC Sierra HD | 2020 – 2024 Freightliner MT45 trucks with 6.6L Gas engine

General Features

Integration Features

Launches OEM component diagnostic applications from the Software Connection Warnings dialog.

Download PDF

View Coverage